Back to Blog
Government Contracting

How to Win a Government Contract With No Past Performance

A government contract with no past performance isn’t ruled out. Under the FAR, an offeror with no relevant record may not be rated favorably or unfavorably on it, and commercial, subcontract, and joint-venture work can count.

Long wire harness with round metal connectors laid out on a bench in a bright electronics assembly bay

Your shop has years of commercial orders and not one federal contract. Then a solicitation asks for past performance, and the form has a box for contracts you don’t have. It reads like a wall.

It isn’t one. Pursuing a government contract with no past performance comes down to three things: how evaluators treat a blank record, what else counts as experience, and which buys come first. It promises no award. The solicitation decides every case.

What Evaluators Do With No Past Performance

Past performance is an evaluator’s read on how well an offeror handled similar work for earlier customers. Under FAR 15.305(a)(2), it’s one indicator of whether the offeror can perform the new contract, weighed by how current and relevant the information is, where it came from, and how the record trends. It’s a separate step from the responsibility check.

Here’s the rule for a blank record, word for word.

FAR 15.305(a)(2)(iv): “In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available, the offeror may not be evaluated favorably or unfavorably on past performance.” Source: Acquisition.gov, FAR 15.305, FAC 2026-01, effective March 13, 2026, read November 20, 2026

No penalty, then. No credit either. Competitors with strong records can earn a favorable rating, and you can’t, yet. That’s the real gap.

The solicitation has to say how it will handle you. The same section requires it to “describe the approach for evaluating past performance, including evaluating offerors with no relevant performance history.” Find that sentence before you write anything.

Responsibility is a different test. FAR 9.104-1(c) counts a satisfactory performance record among the general standards, then adds that a prospective contractor “shall not be determined responsible or nonresponsible solely on the basis of a lack of relevant performance history.” The rest of the list looks forward: adequate financial resources, the ability to meet the delivery schedule, a record of integrity and business ethics, and the organization, skills, equipment and facilities, or the means to get them.

So a blank record isn’t a failing grade. It’s no grade. Section M of a solicitation in the uniform contract format lists the evaluation factors and their relative importance, and that’s where you’ll see what the buyer actually weighs.

Carbon-fiber wing skin on its tool beside an open autoclave in a composite manufacturing hall

Experience That Counts Without a Federal Prime Record

Evaluators aren’t limited to federal prime contracts. FAR 15.305(a)(2)(ii) says the solicitation has to let offerors identify past or current contracts for similar efforts, “including Federal, State, and local government and private.” Whether a given job is relevant is the source selection authority’s call, not yours.

Here’s a working list of what you can cite, the rule behind each item, and what to have in hand.

What you citeThe rule behind itHave ready
Commercial customersFAR 15.305(a)(2)(ii) lets offerors list private contracts for similar effortsScope, dates, size, and a contact who’ll take the call
Subcontracts under a federal prime13 CFR 125.11(c) lets a first-tier small business ask the prime for a ratingThe prime’s written rating
Joint ventures13 CFR 125.11(b) lets a member elect the venture’s record, but not work only its partners didThe contract, plus your own duties on it
Key people and predecessorsFAR 15.305(a)(2)(iii) says evaluators should consider relevant predecessor companies and key personnelResumes tied to the work

A working list, not an official form. The solicitation controls. Rules: 13 CFR 125.11.

The subcontractor rules are specific. Under 13 CFR 125.11(c), a first-tier small business can ask for a rating on a subcontract that carried a subcontracting plan. The prime has 15 calendar days to deliver it, on the five-level scale from FAR 42.1503, Exceptional to Unsatisfactory. Ask within 30 days after the prime’s period of performance ends, unless you both agree to a later date. Put it on a calendar.

Pair whatever you cite with a one-page capability statement. Our capability statement template shows a layout.

Past Performance in Micro-Purchases and Small Buys

Two dollar lines shape most first awards.

Micro-purchase threshold: $15,000. Simplified acquisition threshold: $350,000. Both as FAR 2.101 defines them in FAC 2026-01, effective March 13, 2026, with exceptions for some construction, contingency, and emergency purchases. Source: Acquisition.gov, FAR 2.101, read November 20, 2026

Those figures get adjusted, so read the number the day you rely on it.

Between the two lines, FAR 13.003(b)(1) says purchases “shall be set aside for small business concerns.” Set-aside rules carry exceptions, so read each solicitation instead of assuming. Below the first line, FAR 13.201(b) makes the Governmentwide commercial purchase card the preferred way to buy and pay.

Evaluation can be lighter, too. FAR 13.106-2(b)(3) says judging past performance in a simplified acquisition “does not require the creation or existence of a formal data base,” and it can rest on the contracting officer’s own experience, customer surveys, CPARS, or “any other reasonable basis.”

CPARS is the government’s past performance reporting tool. FAR 42.1502 requires evaluations for contracts over the simplified acquisition threshold, so a smaller job may leave no rating behind. Ask the buyer for a short written reference when the work closes, and keep it. Treat it like a deliverable.

Our post on how contracting officers find small businesses covers where buyers look and how big a buy has to be before it lands on SAM.gov. If a buyer posts a sources sought notice first, what to put in a sources sought response covers the reply.

Large grey hexacopter on a stand inside a tall netted indoor flight cage

Teaming and Subcontracting as a Way In

You don’t have to be the prime first. A small firm can take a subcontract under a company that has the record, or join one in a joint venture, and then cite that work the way 13 CFR 125.11 allows. Teaming has its own homework.

Start with how suppliers get onto a prime contractor’s team, then read the page on prime contractor versus subcontractor roles. The cluster’s prime contractor matchmaking facilitates introductions to defense primes, and no introduction promises a subcontract. If the work touches controlled information, our post on CMMC flow-down for subcontractors covers what a prime will still ask for.

Blunt-nosed grey unmanned underwater vehicle on a steel cradle beside a test tank

Mistakes That Make a Thin Record Look Thinner

  • Calling a small job “similar” when the scope isn’t. Relevance is the evaluator’s call.
  • Adjectives where facts belong. Name the work, the dates, the size, and who bought it.
  • Leaving out a rough job you fixed. The FAR lets offerors describe problems and what they did about them, so a recovery can help.
  • A reference who hasn’t heard from you in years.
  • Claiming joint-venture work that only your partners did. SBA’s rule says you can’t.
  • A first bid far larger than anything you’ve delivered, with no team behind it.

Fix these first.

Before You Submit the Past Performance Section

  • Does each project match the solicitation’s scope in kind, even if not in size?
  • A named customer contact, and they know you’re listing them.
  • For joint-venture or subcontract work, your own role spelled out.
  • Anything else the solicitation asked about past performance, such as a questionnaire.
  • Is your SAM.gov registration active? Our SAM.gov registration guide walks through it.
  • A saved copy, for the next one.

Submit with time to spare. Portals have a way of slowing down in the last hour.

Common Questions About a First Federal Contract

Commercial work or government work: which one do evaluators want to see?

Either one can go on the list. FAR 15.305(a)(2)(ii) requires the solicitation to let offerors identify federal, state, local, and private contracts for similar efforts, and the source selection authority decides how relevant each one is.

What does a contracting officer check when a company has no track record?

Responsibility, which is separate from the past performance rating. FAR 9.104-1 asks about financial resources, the delivery schedule, integrity and business ethics, the organization, experience and technical skills, and the equipment and facilities, or the ability to obtain them. A lack of relevant performance history alone can’t make a company nonresponsible.

Is a micro-purchase worth chasing if it won’t build a CPARS record?

$15,000 is the ceiling as of FAC 2026-01. The dollars stay small. The payoff is a buyer who has seen you deliver and can say so. Ask for that in writing when the job closes.

Does a small business set-aside make up for a thin record?

A set-aside narrows who competes. It doesn’t change how offers are judged. FAR 13.003(b)(1) sets purchases above the micro-purchase threshold and up to the simplified acquisition threshold aside for small business, and the solicitation’s evaluation factors still decide the comparison.

How does a first-tier subcontractor get a rating from a prime?

Ask the prime directly. Under 13 CFR 125.11(c), a first-tier small business on a subcontract with a subcontracting plan can request a rating, the prime has 15 calendar days to provide it, and the request is due within 30 days after the prime’s period of performance ends unless you agree on a later date. If the prime stalls, the subcontractor may tell the contracting officer.

Who can read your experience write-up before it goes to a buyer?

Start with your local APEX Accelerator or the cluster, whose government contracting guidance lists capability statements among what it covers. We won’t write it. A writer who never saw the work can’t vouch for it.

Start With the Records You Already Have

Eligible small businesses in Orange, Los Angeles, and San Diego Counties can apply for membership and bring their commercial and subcontract records to the cluster’s government contracting guidance. Membership and cluster-funded services are provided at no cost to eligible participating businesses, subject to program requirements and available resources.

Apply for Free Membership