Back to Blog
CMMC & Compliance

November 10 Came and Went: What CMMC Still Requires of Your Company

The CMMC compliance deadline of November 10, 2026 never took effect, because CMMC Phase II was suspended in July. The safeguarding rules underneath it still apply: FAR 52.204-21, DFARS 252.204-7012 with NIST SP 800-171, and your SPRS entries.

Ruggedized rack servers behind a locked steel mesh cage in a small defense manufacturer's server room

November 10, 2026 was circled on plenty of shop calendars in Orange, Los Angeles, and San Diego Counties. It was the day CMMC Phase II was supposed to take effect. Then it came. Nothing switched on.

That quiet day is easy to misread. A suspended CMMC compliance deadline isn’t a suspended contract clause, and most of what a small supplier owes on cybersecurity never depended on Phase II in the first place. Readiness help before any future CMMC compliance deadline is part of our compliance work. Below is what’s still on the books today, clause by clause.

What Happened to the CMMC Compliance Deadline

CMMC, the Cybersecurity Maturity Model Certification, is the Department of War’s program for verifying that contractors protect contract information, and its rule sits in 32 CFR part 170. Level 1 covers Federal Contract Information (FCI). Level 2 covers Controlled Unclassified Information (CUI). Assessments come from the company itself or, for some requirements, an outside assessor.

The phases were the rollout schedule, and Phase II was the next step on it. According to the SBA’s July 13, 2026 release, the Phase II requirements “were originally scheduled to go into effect on November 10, 2026” when the Department of War suspended them and started a review of the program. No replacement date came with it.

None has turned up since, either. We checked the official pages we could reach on November 18, 2026. Nothing.

So any article still counting down to November 10 is out of date, and a few of the pages that rank for this question were written before July and never touched again. Check the date at the top before you plan around one.

Wire harness with round circular connectors laid out on a harness board at an electronics shop

What Changed in Solicitations, and What Didn’t

The working detail lives in a less famous document. Class deviation 2026-O0025, Revision 3, issued by the Office of the Assistant Secretary of War for Acquisition and Sustainment, carries the Chief Information Officer’s July 13 memo into the contracting rules. Its first attachment alone runs 71 pages, which is why few small shops ever open it.

Four lines carry the weight:

  • Requiring activities may still write CMMC Level 1 (Self) or Level 2 (Self) into procurement requests.
  • The November 2026 Phase II transition is off.
  • Baseline NIST SP 800-171 Revision 2 compliance under DFARS 252.204-7012 stays required.
  • Contracts already holding the suspended requirements get modified before the next option period, or at the next scheduled administrative modification.

So, self-assessments: still here. NIST: still here.

Flip that permission over and you’ll notice it names only the two Self levels, which means a Level 2 (C3PAO) requirement, the kind of outside assessment a certified third-party assessment organization performs, isn’t on its list at all. Bidding on something still open that asked for one? Expect an amendment. The memo tells program managers to start amendments to active solicitations, and contracting officers to issue them as soon as practicable.

Here’s an odd detail we noticed while reading: NIST’s own website shows SP 800-171 Revision 2 as withdrawn, and the memo names Revision 2 as the baseline anyway, so ask your contracting officer which revision your contract holds you to instead of guessing from the NIST homepage.

Clause numbers shuffled as well. Look for DFARS 252.240-7997, dated February 2026, which carries the old 252.204-7020’s title word for word: “NIST SP 800-171 DoD Assessment Requirements.” Contracts signed before the change still print 7019 and 7020, so two awards in the same drawer can use two numbering styles. Annoying. Read every clause list anyway.

What Still Applies After the CMMC Compliance Deadline Passed

Short map below. Your clauses pick your rows.

RequirementWhen it appliesWhat it asks
FAR 52.204-21Your systems hold Federal Contract Information15 basic safeguards; flow-down to subs that may hold FCI
DFARS 252.204-7012Your work involves covered defense information (CUI)NIST SP 800-171 controls; cyber incidents reported within 72 hours
DFARS 252.240-7997Systems that must meet NIST SP 800-171 under 7012Access for a government assessment if needed; scores posted in SPRS
CMMC Level 1 or 2 (Self)Only when the solicitation names a levelStatus no older than 1 year (Level 1) or 3 years (Level 2), plus a yearly affirmation

A quick way to sort yourself: if what the government sends you is contract information that isn’t meant for the public, and none of it arrives marked as CUI or described in your contract as covered defense information, then FAR 52.204-21 and its 15 safeguards are your floor. A drawing or technical data package marked CUI changes the job. Now DFARS 252.204-7012 applies, with the 110 requirements of NIST SP 800-171 Revision 2 behind it. Fifteen against 110. That’s the gap.

The SPRS side has its own rules about who signs and how often, covered in our post on how SPRS scores and yearly affirmations work. For the levels themselves, our earlier piece on the CMMC levels and where a small shop starts still holds.

Flow-Down Still Reaches Subcontractors

This is the part that catches small suppliers. FAR 52.204-21 tells the contractor to put the substance of the clause into subcontracts where the subcontractor may have Federal contract information, and paragraph (m) of DFARS 252.204-7012 does the same for any subcontract whose performance will involve covered defense information.

So a machine shop three tiers below the prime can carry the same 72-hour reporting duty as the prime. The deviation even spells out the relay. A subcontractor reports the incident to DoD, then passes the report number to the next tier up, until the prime contractor is reached. Nobody skips a rung.

Primes also write their own subcontract terms. If one still asks you for a third-party CMMC certificate, ask which clause or requirement is behind the request. It might be the government’s. It might be the prime’s own supplier policy. Those are different conversations, with different answers.

Some suppliers sit at more than one tier at once, with FCI on one job and CUI on another. Scope each contract on its own. Our CMMC guides for small suppliers take each clause further, and our CMMC compliance checklist puts the steps in order.

Carbon-fiber wing skin on its layup tool rolled out of an autoclave in an aerospace composites shop

A Working List While Phase II Is on Hold

None of this needs a big budget. Most of it needs an afternoon, your contract files, and whoever runs your IT.

  • Pull your last three awards and purchase orders. Which of 52.204-21, 252.204-7012, 252.204-7019, 252.204-7020, 252.240-7997, and 252.204-7021 actually appear?
  • Who files a cyber incident report at dibnet.dod.mil, and could they do it on a Saturday? Decide now. The 72 hours count from discovery, not from Monday morning.
  • SPRS dates go on a calendar.
  • CUI landing in a personal inbox or on an unmanaged laptop is the first fix, before any policy binder.
  • Ask your prime, in writing, what it plans to flow down on its next subcontracts.
  • Already partway through NIST SP 800-171 work? Keep going. The memo still requires the Revision 2 baseline wherever 7012 applies, so stopping now only means restarting later.

Plenty of companies work through this list alone, and that’s fine. If you’d rather have someone walk it with you, the cluster gives readiness guidance and refers companies to third-party assessors. We don’t certify anyone. Formal CMMC certification requires a third-party assessment organization.

The Pause, in Short Answers

Is CMMC cancelled, or only on hold?

Short answer: on hold. Suspended, per the SBA’s release, while the program gets reviewed. Solicitations can still ask for Level 1 (Self) or Level 2 (Self) under the class deviation, so “cancelled” is the wrong word for your next staff meeting.

When will the November 10 date come back?

Nobody has said. No new Phase II date appears in the SBA release or in the class deviation. We won’t make one up. Keep an eye on the DoD CIO’s CMMC pages, and on the clause list of whatever you bid next.

Did the pause change the 72-hour incident report?

72 hours. DFARS 252.204-7012 still defines “rapidly report” that way, counted from when you discover a cyber incident, and reports still go to DoD at dibnet.dod.mil. Far from loosening 7012, the suspension memo leans on it for the Revision 2 baseline.

How current does a Level 1 self-assessment have to be?

A Final Level 1 (Self) status is good for one year in the deviation’s clause text. Same limit for the affirming official’s sign-off. Neither matters until a solicitation names a CMMC level, so look for that first.

A prime still wants a third-party certificate. Now what?

Start with the reason, not the certificate. Government requirement in the prime contract, or the prime’s own supplier policy? That one question changes what you’re really being asked to prove. Ask by email, so the answer exists on paper.

Can a readiness review make a company CMMC certified?

Not on its own. Formal CMMC certification requires a third-party assessment organization. A readiness review is narrower and, early on, more useful: it lines your systems up against the clauses you’ve actually signed and shows the gaps while there’s still time to close them. Our compliance service does that through guidance and referrals.

Keep Your CMMC Readiness Work Moving

The SoCal Defense Innovation Cluster provides CMMC readiness guidance and referrals to certified assessors for eligible small businesses in Orange, Los Angeles, and San Diego Counties. Membership and cluster-funded services are provided at no cost to eligible participating businesses, subject to program requirements and available resources.

Apply for Free Membership